Rockford Fosgate P400X4 Punch 400 Watt 4 Channel Amplifier producing 100 Watts into all four channels at 2-Ohm
Low Prices
Price match guarantee
Guaranteed Fitment.
Always the correct part
In-House Experts.
We know our products
Easy Returns.
Quick & Hassle Free
Description
The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. Rockford Fosgate's Punch P400X4 amplifier can put out 50 watts RMS to each of your front and rear speakers, plenty of power for clean music even at high levels. You can use the amp's high-pass filter to remove low bass from your speakers so they'll play more efficiently. You can also switch this amp into 2-channel mode to drive a couple of subwoofers with up to 200 watts RMS each. The amp's low-pass filter comes in handy for getting the right sound from your sub/enclosure combo. The Punch EQ2 includes bass and treble boosts, in case you want to add some boom and sizzle back into the mix. Stealth top mounted control panel Cast aluminum heatsink Short circuit protection Over current protection 1 Year Standard Warranty.
Features
- •50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged, Works with factory installed & aftermarket source units
- •Onboard 12dB/octave LP/HP/AP crossover. NOTE: Use 40Hz @ 0dB (Track 5) for subwoofer amplifiers or 1kHz @ 0dB (Track 7) for full-range amplifiers.
- •On-board Punch EQ with +18dB boost at 45Hz, Cast Aluminum Heatsink with Stealth top mounted control panel
Related Products
NAKAMICHI NHPD100.4 Class D 4-Channel Car Audio Amplifier | 100W X4 RMS, 2500W Peak Power per Channel
Elevate your car audio setup with the Nakamichi NHMD100.4 – a high-efficiency Class D amplifier built for clean, powerful sound. Delivering 100W RMS per channel, this 4-channel amp is ideal for driving your mids and highs with precision. Perfect for UAE drivers seeking reliable power in the heat and dust, the NHMD100.4 includes built-in crossovers and a compact footprint for flexible installation.Key Features:100W RMS x 4 output for balanced, high-quality soundClass D technology for efficient power delivery and reduced heatFull crossover controls with LPF, HPF, and Bass BoostBridgeable channels for more power configuration flexibilityHigh and low-level input compatibilityCompact size with rugged build qualityMultiple protection circuits for safety and reliabilityWhat’s in the Box:Nakamichi NHMD100.4 AmplifierMounting ScrewsUser Manual
Rockford Fosgate T400X2Ad Power 400 Watt Class-Ad 2-Channel Amplifier
Rockford Fosgate POWER AMPLIFIER T400X2 AD 2-channel amplifier 2 x 200WRMS Power Micro Series T400X2 AD 2 x 200/200 W RMS into a 4/2 ohm 1 x 400 W RMS bridged at 4 ohms High / low pass 50-250 Hz 0-18 dB bass boost, 0-14 dB treble boost CLEAN Setup High level inputs with Auto Turn On optional PLC2 Bass Remote with clipping LED 75% efficiency inkl. Leistungszertifikat AP Power: W RMS bridged 2x211 / 320 or 1x620.
Rockford Fosgate PBR400X4D Punch Compact Chassis Amplifier Full Range Class D design produces maximum power
The Punch PBR400X4D is a full-range 4-channel amplifier that is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power! The BRT (Boosted Rail Technology) allows the PBR400X4D to be compact and efficient while providing power on demand. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Our integrated level setting technology called Calibrated Level Eliminates Audible Noise helps to quickly setup the amp output controls by removing the guesswork & eliminating any speaker damaging distortion.The amplifier will accept both speaker level and RCA level signal types through the same inputs, allowing it to be integrated into OEM and aftermarket systems alike. This versatility makes the amplifier perfect for a wide variety of installations and vehicles. Dual Selectable Crossovers Improve Flexibility. Installation flexibility is improved by the addition of dual, selectable high pass crossovers. With crossover points at 60Hz and 80Hz, you can now better set up the output of the amplifier to match the connected speake
Rockford Fosgate R2-300X4 300-Watt 4-Channel Amplifier
The Prime Series were developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.
Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier
ROCKFORD CORP Prime 150 Watt 2-Channel MOSFET Auto AmplifierRockford Fosgate amplification at an unbelievable value. The R150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10/" orR1S412 12/" woofer. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier. 12dB/octave crossover 4 Gauge power/groundconnections w/built-in ATC fusing MOSFET output stage MOSFET power supply RCA pass-thru CEA-2006 Compliant Number of Channels 2 Rated Power, continuous power 50 Watts RMS x2 @ 4-Ohms 75 Watts RMS x 2 @ 2-Ohms 150 Watts RMS x 1 @ 4-Ohms Bridged/Mono Total Power, total sum of 'rated power' 150 Watts Dynamic Power, powercube measurement (info) 57 Wattsx 2 @ 4-Ohms 0/xb0 Res 85 Watts x 2 @ 2-Ohms 0/xb0Res Bridgeable Yes Efficiency (average)60% @ 4-Ohm 54% @ 2-Ohm Crossover Controls High-Pass (HP): 80Hz @ 12dB/octave Butterworth Low-Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth Tone Controls Punch Bass: 0dB to +12dB @ 45Hz Signal Input Low Level: 1 RCA pair Signal Output Low Level: 1 RCA pair PowerInput Connector Screw terminal barrier strip Power Wire Gauge 4 AWG Speaker Output Connector Screw terminal barrier strip Speaker WireGauge 8 AWG Heat Sink Type Extruded Aluminum Cooling Convection Visual Indicators Power Protect Circuit Topology Class ClassA/B Frequency Response 20Hz to 20kHz +/-1dB Shipping Weight TBA Lbs. (TBA Kg.) Dimensions (HxWxL) 2.40 x 7.67 x 11.54 (in) 6.10 x19.49 x 29.30 (cm).
BOSS Audio Systems PF2200 Phantom 2200 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control
Shift your music into gear with the Boss Audio Phantom PF2200 4-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable amplifier features 2200 Watts Max Power with a MOSFET power supply for better performance to get your vehicle rocking. Customize the sound with Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Phantom Series are full-featured amplifiers that offer eye-catching Multi LED Backlit Illumination and customization for high quality sound and performance. Rock out with the Boss Audio PF2200.
BOSS Audio Systems Elite BE1600.4 4 Channel Car Amplifier - 1600 Watts, Full Range, Class A-B
POWER: 400 Watts Max x 4 @2-Ohms, 200 Watts Max x 4 @4-Ohms, 800 Watts Max x 2 Bridged @4 OhmsCLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signalFULL RANGE: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofersMOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitryVARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifierLOW / HIGH LEVEL INPUTS: A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakersBRIDGEABLE: Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channelsDIMENSIONS: The BE1600. 4 is 11. 9 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 5 lbs.
BOSS Audio Systems AR2000M Monoblock Car Amplifier - 2000 Watts, 2-4 Ohm Stable, Class A-B
Variable bass Boost - bass Boost allows you to adjust the low bass within the boost Range to just the way you like it.Variable n control - The n control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier. Dimensions - 13.13” x 6.5” x 2.8”, weight - 3.81 lbs. It can be installed in a variety of different places due to its’ slim and Compact design. Class A/B topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Variable low-pass Crossover - subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.